6
bleeding after two weeks of use, stop using this product and
consult your dentist.
Battery change
Note: Do not replace the battery when the device is wet. Do not
allow moisture to get inside the device, for example when it is
disassembled
. The device is designed only to be powered by an
AA battery, it is forbidden to use any other type of power
source.
To replace the battery, follow the steps described in the photo
at this point.
1.With one hand hold the main body of the device and with other
hand turn the battery cover to the left, as in the photo below.
2.Slide off the battery cover
3.If some other battery is installed in the device, remove it by by
tilting it from the down part marked with the
(+)
sign. When the
battery socket is empty, insert the new battery by first inserting
the part marked with
(-)
sign. Make sure the battery fits.
4. Insert the battery cover into the device
5.Tighten the battery cover to the right as in the photo below.
Toothbrush Head Replacement
Its recommended to replace Toothbrush Head every 3 months
or sooner if signs of wear appear.
When replacing hold the main part of the device with one hand
and with the other hand rotate toothbrush head as on the
picture bellow and pull in the opposite directions to the main
