7
U S E R M A N U A L
EN
Extended user guide available on www.bemi-electronics.com
Product description
1.Screen
2.
Charging terminal
3.Heart rate sensor
4.Power button
Smart band mode: KIX-M,
in manual called “device”
It is mandatory to read this manual before start to using the
device.
To
turn on the device
, press the power button for 5 seconds or
connect to the charger. To turn off the device, press the power
button for 5 seconds.
Maintaining Equipment
Clean the device regularly, especially
part that close to the skin,
to keep it dry. Adjust the tightness of the device belt to ensure
air circulation. On wrist, where wearing device should not use
excessive skin care products. If you have skin allergy or
discomfort, please stop wearing device. Do not wear the device
during a hot bath or shower. Do not expose the device to
cleaning agents, caustic agents or other chemicals. Do not
expose the device to high (over + 50 ° C), low (below
-
10 ° C)
temperatures or heat due to, for example, sunlight or other heat
source. It may damage the device. The product is not suitable for
children and infants.
Note:
IP68 means that this device is
resistant to a single immersion in standing water to a depth of
1.1 meters for up to 1 hour. Exposing the device to tougher
conditions can damage it. This device is not intended for water
sports, diving and swimming.
