1. Remove the Siesta chair from the carton. CAUTION! To avoid damage to the upholstery, do not use a
knife to open the carton.
2. Carefully remove the protective packing from the control.
NL54 Nile Backwash Units:
6. Fasten two J-hooks to the front of the NL54 backwash cabinet with two 3/4” long wood screws provided.
7. Place the back tube of the Siesta chair
frame into the J- hooks on the front
of the Nile backwash cabinet.
8. The hanger-loop for the remote
control may be fastened to the
cabinet. Drill two holes, 3/16”
diameter, 1-9/16” apart at a
convenient location.
Fasten the hanger loop
with two screws provided.
SIESTA CHAIR INSTALLATION
7
The SR24 and SR34
electric Siestas come
with a 10-foot power
cord. The unit must be
plugged into a GFCI
(Ground Fault Circuit
Interrupter) circuit or
outlet. The GFCI
should be installed by
a qualified electrician.
The outlet may be
located on the wall or
in the floor according
to local electrical codes.
Electrical requirements:
115 volts, 100 watts.
SCREW (2)
J-HOOK (2)
NILE
BACKWASH
CABINET
1-
9
/
16
”
3
/
16
” DIA. 2 PLACES
DRILL PATTERN FOR
HANGER LOOP
SUGGESTED
LOOP HANGER
LOCATION (IF
NO PLUMBING
CABINET USED)
SR24 SIESTA
CHAIR SHOWN
Produced by: J. Baer
Date: 06/06
Amended: 02/07
Version: 1
Shampoo Seating System
Siesta
4000978
