7
installation (cont.)
NOTE ON THE POWER SUPPLY LEAD (YELLOW):
When connecting this unit in combination with other stereo components, the
amperage rating of the car circuit to which the unit is connected must be higher
than the sum of each component’s fuse amperage rating
MOUNTING ANGLE ADJUSTMENT:
Adjust the mounting angle to less than 30°.
REMOVING THE PROTECTION COLLAR AND THE BRACKET
Before installing the unit, remove the protection collar and the bracket from the unit.
• Pinch both edges of the protection collar, then pull it out.
• Insert both release keys until they click, and pull down the bracket, then pull up
the unit to separate
MOUNTING THE UNIT IN THE DASHBOARD
Before installing, make sure the catches on both sides of the bracket are bent
inwards 2 mm (3/32 in).
• Position the bracket inside the dashboard, then bend the claws outward for a
tight fit.
• Mount the unit onto the bracket, then attach the protection collar.
NOTES:
• If the catches are straight or bent outwards, the unit will not be installed
securely and may spring out.
• Make sure the 4 catches on the protection collar are properly engaged in the
slots of the unit.
• This parts list does not include all the
package contents.
• The bracket and the protection collar
are attached to the unit before
shipping. Before mounting the unit,
use the release keys to remove the
bracket from the unit.
• Keep the release keys for future use
as they are also necessary if you
remove the unit from your car.
Parts for installation
install steps