Technical Documentation
KSR-Z – Capacitor-Bank Protection Relay
Rev. 04
Page
21
/
36
3.4
Menu “device info”
This menu shows information about the device :
SW = software version
HW = hardware revision number
SN = serial number of the device
FLAGS = options of the device
The „M“ - key will switch back to the main menu.
To reset the KSR-Z to factory settings, press button 2 & 3 simultaneous.
After pressing the buttons the display reading
below should appear.
This sets all relay settings, parameters, alarm
or trip settings to factory setting.
