FITTING INSTRUCTIONS
E N G L I S H
The BeltUpp strap comes in two parts:
Part 1,
the buckle short strap and the
locking clip.
Part 2,
the tongue, long adjustable
strap and the slider clip.
How to install
Keep the child seat in the correct position
in the car. Separate part 1 and 2 by
pressing the red release button.
Locate the bottom anchor point of the
cars integral adult 3 point seat belt. This
is normally down at the base of the seat
on the same side as the door opening.
Attach the locking clip on part 1 to the
strap at the base of the seat. Make sure
the buckle is on the outside of the adult
strap (facing outwards) so that it can be
easily operated.
(Diagram 1)
The buckle should be outside the seat so
that when it is done up it is not on
pressing the child’s leg or lap.
Diagram 1
Buckle not on lap or leg
Buckle facing outwards
Base of seat
Locking
Clip
Locking clip added to
Adult strap
