BELTTT BECL10A Operation Manual Download Page 3

Reverse connection protection: the reverse connection of positive and negative polar will not 

destroy the battery 

Charging Indication 
The initial stage: Red indicator means the charger is charging the battery with rated current 
The later stage: Green indicator means float charging to battery’s latest 95%-100% power, 

please keep it for 2-3 hours; the battery will gain good performance. 

 

The Charging Procedures

 

1.

 

Check if the battery rated voltage matches the charger’s output voltage. 

2.

 

Connect the charger and battery correctly as required. 

3.

 

Check the charger’s input voltage if it is same as AC voltage. 

4.

 

Check whether the indicator works when the charger comes to AC power 

5.

 

If the indicator doesn’t work, please shut off the AC power, and check if there is wrong with 
AC power, battery or related connections. 

6.

 

When fully charged, please shut off the AC power first and then disconnect the battery 

 

Safety cautions 
1.

 

The device is designed for 12V lead-acid battery, can not use as power supply for other 

electronics. 

2.

 

The device inside has high voltage with danger, the user or non-professional technician 

are  prohibited  to  open  the  device,  please  contact  with  your  local  distributor  or 
manufacturer once breaks down 

3.

 

Since heat will produce when charging, the device and battery should be put on ventilative 

room, moisture, heating, inflammable or explosive environment is prohibited to use the 
device. 

Note: Under reverse connection protection, the device does not have output voltage when it 
does not connect with battery. Once connected, the device has output voltage. 

 

Technical Specifications 
 

Model No. 

Rated

 

Input

 

voltage

 

Rated 

voltage 

Constant 
charging 

current 

Constant 

voltage 

No load 
voltage

Rated 

frequency 

Full Load 

efficiency

Temperat

ure 

range 

BELC -10A 

220V 

12V 

10A 

14.6V 

0V 

50/60Hz 

≥85% 

-20~+60

BELC -20A  100~260V 

12V 

20A 

14.6V 

0V 

50/60Hz 

≥85% 

-20~+60

BELC -50A 

220V 

12V 

50A 

14.4V 

0V 

50/60Hz 

≥85% 

-20~+60

 

 
 
Battery capacity range 
 

12V/10A charger for stand lead-acid battery 12V/30A to 100AH 
12V/20A-25A charger for stand lead-acid battery 12V/60A to 200AH 
12V/50A charger for stand lead-acid battery 12V/150A to 500AH 

Reviews: