Pilot HWY
Pilot t
Pilot V
Voice ON
Voice OFF
PwrOn STD
PwrOn FST
Meter STD
Meter TEC
aMute ON
aMute OFF
City STD
City LoX
City NoX
Bands DFT
Bands MOD
X
ON
or
OFF
(default is on)
K
ON
or
OFF
(default is on)
Ka ON
or
OFF
(default is on)
POP ON
or
OFF
(default is off)
LSR ON
or
OFF
(default is on)
SWS ON
or
OFF
(default is off)
TSR ON
or
OFF
(default is off)
Programming
There are 7 user-selectable options so you
can customize your V995 for your own
preferences. The buttons labeled CITY and
BRT are also used to enter the Program
Mode, REVIEW your current program
settings, and to CHANGE any settings as
desired. The words PGM, RVW, and CHG are
located on the top of the detector, and are
highlighted in colored graphics. Pages 14-
16 explain each option in more detail.
How to use Programming
1
To enter Program Mode, press and
hold both the CITY and BRT buttons
down for 2 seconds.
The unit will beep
twice, and will display the word
Program
.
2
Then press the RVW button to
review the current settings
. You can
either tap the button to change from item
to item, or hold the button to scroll through
the items.
3
Press the CHG button to change
any setting.
You can either tap the button
to change from setting to setting, or hold
the button to scroll through all the options.
4
To leave the Program Mode,
simply wait 8 seconds without
pressing any button, or press the PWR
button.
The unit will display
Complete
,
beep 4 times, and return to normal
operation.
An example
Here is how you would turn your V995’s
AutoMute feature off.
1
Enter the Program Mode by holding
both the CITY and BRT buttons down for
2 seconds.
The V995 will beep twice and
display
Program
.
2
Then hold the RVW button down.
The
V995 will scroll through the categories,
starting with Pilot (
Pilot
), Voice
(
Voice
), Power-on sequence (
PwrOn
),
Signal strength meter (
Meter
), and then
AutoMute (
aMute
).
3
Release the RVW button when the
V995 shows the AutoMute item.
Since the
factory setting is for AutoMute to be on,
the V995 will display
aMute ON
.
If you accidentally don’t release the
RVW button in time, and the V995 goes to
the next category, hold the RVW button
down again, and after your V995 scrolls
through all categories, it will begin again
at the top of the list.
4
Press the CHG button to change from
aMute ON
to
aMute OFF
.
5
To complete the Programming, simply
wait 8 seconds without pressing any
button, or press the PWR button.
The V995
will display
Complete
, beep 4 times, and
return to normal operation.
12
13
Overview of Programming
*
Factory Default Settings
To reset your V995 to its original
factory settings, press and hold
the “CITY” and “BRT” buttons
while turning the power on. The
V995’s display will provide a
Reset
message, accompanied
by an audible alert,
acknowledging the reset.
Press the REVIEW button
to go from one
category to the next
PILOT
(Power-on indication)
VOICE
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
CITY MODE SENSITIVITY
BANDS
Press the CHANGE button
to change your setting
within a category
* Full word: Highway, AutoScan or City
Letter: H or A or C
Vehicle voltage
* Voice alerts on
Voice alerts off
* Standard power-on sequence
Fast power-on sequence
* Standard signal strength meter
Tech Display
* AutoMute on
AutoMute off
* Standard City mode sensitivity
Low X band sensitivity in City Mode
No X band sensitivity in City Mode
* All band enabled
One or more bands are disabled
Turn bands “ON” or “OFF” by
pressing the VOLUME•MUTE button
