![background image](http://html1.mh-extra.com/html/beltronics/gt-360/gt-360_quick-reference_2730770008.webp)
Installation
Controls
&
Features
4
4
To adjust view, loosen thumb wheel and adjust
angle of mounting bracket. Tighten thumb wheel
to secure.
5
Tilt the display end of the detector slightly
upward and engage with the flanged edge of the
mounting bracket. The EZ Mag Mount™ magnet
holds the detector in place.
6
To remove the detector, simply lift the display
end of the detector upward. The detector will
release from the mount.
7
To remove mount from windshield, release
locking clamp and pull tab on top of StickyCup.
EZ Mag Mount™ Care Instructions:
Should the EZ Mag Mount™ StickyCup accumulate
debris and lose its stickiness, simply rinse under
warm water, gently wipe off debris and allow to
air dry.
Your new detector comes with the revolutionary
EZ Mag Mount™. Simply tilt the display end of the
detector up and slide it onto the mounting
bracket. The magnetic mount holds the detector
in place. To remove the detector from the mount,
simply lift the display end of the detector and the
detector releases from the mount.
Mounting Tips:
•
Center of windshield between driver and
passenger.
•
Ensure clear view of road ahead and sky
above.
•
Avoid windshield wipers and heavily tinted
areas.
To mount the detector in your vehicle:
1
Remove paper backing from EZ Mag Mount™ `
StickyCup.
2
Ensure the locking clamp is open.
3
Firmly press EZ Mag Mount™ StickyCup onto
windshield and close the locking clamp to secure.
Locking Clamp (closed)
Thumb Wheel For
Angle Adjustment
Mounting Bracket
Release Tab
StickyCup
GT-360
EZ Mag Mount™