Programming
Press BRT to go from
Press or – to change
one category to the next
your setting within a category
User Mode
Advanced*
Access and customize all Settings and Preferences
Novice
Access and customize units and display color, (all other
Settings are set to factory defaults)
NOTE: Switch back to Advance mode to view all Preferences
Pilot
Scan Bar*
Scanning Bar with Full Word
Full Word
Full Word: AutoScan, Auto NoX, or Highway
Display Color
Copper*/Blue/Green/Red
Set color to match your vehicle’s dash display
Speed Display
On*
Displays current speed
Off
Displays battery voltage
Cruise Alert
Off / 20-160 mph
Offers double beep alert tones below specified speed
20 mph*
Over Speed
Off / 20-160 mph
Reminds you when you exceed a specified speed
70 mph*
Meter Mode
Standard*
Single band with front and rear signal strength bar graphs
Tech
Single band with numeric frequency and front and rear
signal strength bar graphs
Basic
Simple messages replace bands:
Caution
(if traveling below cruise alert limit)
Slow Down
(if traveling above cruise alert limit)
Tones
Standard*
Standard Beltronics alert tones
Mild
Mild doorbell chime alert tones
AutoMute
Low/Med*/High/Off
Automatically reduces audio to preferred volume during alert
AutoLock
On* / Off
Automatically stores and locks out false alarms
Units
English*/Metric
Units for distance and speed
Language
English*/Espanol
Language for voice and text
Voice
On* / Off
Voice announcements
GPS Filter
On* / Off
Enables GPS-powered features
Press and hold the BRT and SEN buttons to access Programming. To exit Programming, simply wait a few
seconds without pressing a button. The unit will display
Completed
to confirm your selections.
7
