manualshive.com logo in svg

Beltone TO1715, Instructions For Use Manual, Page: 2 / 36

Share
Download
Beltone TO1715 Instructions For Use Manual Download Page 2

2

A new Beltone hearing instrument

Congratulations on your choice of a Beltone hearing instrument!
This is an important step towards clearer hearing and better under-
standing. We have used all our experience with hearing instruments to 
help you communicate, lead an enjoyable social life and listen to the 
world around you.
Your hearing instrument is a very advanced device. Your hearing care 
practitioner has tuned it to your individual needs. With a little devotion 
and patience you will become familiar with it.
Your instrument may also include the Tinnitus Breaker function 
(TO17xx models only), a tool for generating sounds to be used in 
tinnitus management programs to relieve suffering from tinnitus. 
The Tinnitus Breaker can generate frequency and amplitude shaped 
white noise. Noise signal level and frequency characteristics can be 
adjusted to the specific therapeutic needs as determined by your 
doctor, audiologist, or hearing care practitioner. Generated noise can 
be modulated with the purpose of making it more pleasant. The noise 
can then resemble, for example, crushing waves on a shore.
This booklet is a short guide to assist you in getting acquainted with 
your hearing instrument. Read it carefully and use it as a guideline.
We wish you happiness and pleasant listening with your new instru-
ment.
Beltone

Caution to Tinnitus Breaker users

Should you develop any side effects from using the Tinnitus Breaker 
feature, such as dizziness, nausea, headaches, perceived decrease 
in auditory function or increase in tinnitus perception, you should 
discontinue use of the device and seek medical evaluation.

Summary of Contents for TO1715





































Reviews:

No comments