Phone Link – Pairing with TRUE
Equipment used in this test:
1 Direct Line
TM
charger
1 or 2 TRUE devices.
1. Checking Charger and charging.
•
Before any tests is performed, make sure the BTB is charged
•
Connect the charger to the mini-USB socket on the BTB.
•
Check that the LED turns red (or green if BTB is fully charged).
2. Prepare for pairing of TRUE devices with BTB.
•
Applicable for both Bluetooth pairing procedures.
DO NOT switch TRUE devices on yet.
R
th
t lli
t th b tt
f th BTB
LED indicator
!
•
Remove the metallic cover at the bottom of the BTB
•
Switch the BTB on by pressing the multifunction key for approx. 1 sec.
•
Check that the blue LED turns on and stays on for approx. 4 sec.
3. Pairing of TRUE devices with BTB.
Pairing bottom
3. Pairing of TRUE devices with BTB.
•
Press the pairing bottom on the BTB
•
Check the blue LED turns on solid
•
The BTB will stay in pairing mode for 20 sec.
•
Close the battery doors on the TRUE devices
Sound sample:
•
The TRUE devices will play the
Delayed Activation
sound.
•
Check that each of the TRUE devices are found indicated by
Pairing Complete
tune played by each TRUE device
Delayed Activation
Sound sample:
Pairing Complete
Functional
Test
– Quick
Guide
|
Global
Technical
Operation
|
Page
14