FOLLOW STEPS 13 TO 19 FOR 6’ AND 8’ PLASTIC PARK RANGER
13.- Place brace between 2 table “J”
Legs and insert 3-1/2” long bolt.
Hand fasten nut.
14.- Attach Leg set to
outside Top “L” Bracket.
Use 2” bolts / nuts.
15.- Attach loose end of Brace
to Center Bracket outer holes
using 1” bolts / nuts.
Note: Do not fully tighten any of the nuts
from steps 13-15 until step 18 below.
16.- Flip the partial table assembly into an upright position.
17.- Attach Seats to Frame with table legs outside Seat
Brackets as shown. Use 2” bolts / nuts.
18.- Tighten all nuts firmly, including assembled parts in
steps 13, 14 and 15.
19.- The Picnic Table is finished.
5
