Belshaw-Adamatic Bakery Group HG18/HG24 Donut Glazers, MN-1744
CALL 206-322-5474 or EMAIL [email protected] for SUPPORT
12
5 Operation
– HG18EZ/HG24EZ
General Use of the Glazer
To use the HG18EZ or HG24EZ
Glazers, SET a screen of donuts onto
the Screen Support, then PASS the
Glaze Applicator over the donuts by
the frame-supported applicator on the
Glazer.
The Glaze Applicator is designed to
give uniform glaze coverage to donuts.
Any excess glaze will drain back into
the reservoir.
Operating the Glazer
1.
After the Glazer has been
cleaned, sanitized and
assembled, POUR glaze into the
glaze reservoir section of the
Kettle (Kettle will hold
approximately 30 pounds of
glaze).
2.
TILT the Upper Frame assembly
up, placing the Glaze
Applicator into the Glaze
Reservoir (See Figure 17.)
Figure 17, Filling Position
3.
Allow the Applicator to FILL
with glaze.
4.
PLACE a screen of donuts on top
of the Screen Support, locating
it on the pins.
5.
SPREAD the Glaze Applicator
handles apart to close the
bottom of the applicator.