BELRAM USXT2 Transmitter, User Manual, Page: 8 / 12

Setup
(continued)
8
4. Connect your 12G-SDI interface to the USXT² Receiver unit (”
SDI OUT 1
”).
Note:
A secondary output is provided. Both outputs can be used simultaneously.
5. Plug the power cable in the USXT² Receiver’s powerCON TRUE1 TOP chassis
(“
Power
”).
6. Connect the fiber cable to the USXT² Receiver’s Neutrik opticalCON DUO chassis
(”
FIBER IN
”).
Note:
Multimode or Singlemode fiber may be used. Consult “ Technical Specifications ” (p.6) for maximum
transmission distances.
7. Check the status LED:
If everything is connected correctly, the LED will show the SDI signal status:
• Off -> No Input
• Red -> SD-SDI
• Green -> HD-SDI
• Blue -> 3G-SDI
• Yellow -> 6G-SDI
• Purple -> 12G-SDI