STEP 5
STEP 6
（2）
（8）
（9）
（10）
STEP 5:
Insert Cam Locks (Part C) into the Upper Front
Panel (Part 8) and ensure the arrow side is facing
outwards. Slide the Screw-In Pegs on the Left and Right
Side Panels into the Cam Lock Receiver Holes in the
Bottom Plate and Upper Front Panel (Part 8). Turn Cam
Locks clockwise to tighten.
NOTE: Ensure grooves in side panels are at the
back of the unit and align with the grooves in
the Bottom Plate
Grooves
Upper Front
Brace
STEP 6:
Align the Lower Back Panel (Part 10) with the grooves in
the Left and Right Side Panels and slide down until fully seated in
the grooves of the Bottom Plate. Repeat steps with the Upper
Back Panel (Part 9).
Lower Back Panel
Upper Back Panel
（3）
（4）
（8）
C
C
C
C
C
C
C
*
6
