STEP 5
STEP 6
D
*
4
（7）
（7）
（10）
（10）
（8）
（9）
D
D
D
D
STEP 5:
Carefully place frame into an upright position. Place the
Lower Rear Panel (Part 9) into the grooves on the Left & Right Side
Panels and slide down into the groove on the Bottom Plate. Once
seated place the Upper Rear Panel (Part 8) into the grooves on the
Left & Right Side Panels and slide down until it meets the Lower
Rear Panel.
Note: Ensure Lower Rear Panel Is Fully Seated Into Grooves On Bottom Plate
Cam Lock
Cam Lock
Cam Lock
STEP 5A:
Ensure Cam Locks (Part D) are inserted
in holes with open side facing outw
a
rds toward
receiver hole for Screw-In pegs (Arrow Side). Insert
Short Screw-In Pegs on the
Inner Support
Fa
s
cia
(Part
10
) into the Cam Locks (Part D) on the
Inner
Support
. Turn Cam Locks clockwise to tighten.
STEP 5
B
:
Ensure Cam Locks (Part D) are inserted
in holes with open side facing outw
a
rds toward
receiver hole for Screw-In pegs (Arrow Side). Insert
Short Screw-In Pegs on the
Inner Support
Fa
s
cia
(Part
10
) into the Cam Locks (Part D) on the
Inner
Support
. Turn Cam Locks clockwise to tighten.
Inner Support
Inner Support
