6.
Connect
DC Extension Cable
(P
art G
)
to
the
"Power" port (see 1st
image
below) on the
C
ontrol
Bo
x
attached to the bed. C
onnect
the other end of the DC Extension Cable to the Power
Supply Box
(P
art E
)
.
Connect the Power Cable
(P
art F
)
to the Power Supply Box
(Part E)
then
insert the plug into
your nearby power outlet.
7.Insert
(2)
AAA B
atteries (
Part H
)
into the
Part D
remote control.
then p
ress any
button. If the
motor begins to run, unplug the power supply and turn the bed over to its right side-up position. If
the motor does not run, it needs to re-match its code.
Matching code:
Method 1:
Turn
off the power and wait for 10 seconds. Then plug the power again. You will see
the
blue light on the control box
(like first picture).
P
ress and hold the
top and bottom
buttons
at the
same time
(
as
the second picture
below
shows). Release
them
when the white backlight flashes.
Finally, if the blue light in the controller turns to green, the
code
matches.
Method 2: Press
"
PAIR
"
button
on the remote control twice. T
he blue
light
will appear
(
as
the circle
shows in the first picture
below
).
Press and hold the top and bottom buttons at the same time (as
the second picture below shows). Release them when the white backlight flashes.
Finally, if the
blue light in the controller turns to green, the code matches
8. Insert the mattress rail
Part B
at the foot of the bed. Then the bed is ready for use.
Summary of Contents for AL-DM0201-F-GG
Page 7: ...Remote Control Functions ...
