ECO-6 Electrical Instructions
IMPORTANT NOTE: Approved electrical components are used in the ECO-6 cabinet ; however,
the procedures described herein must be performed by a licensed electrician using approved
methods and materials according to the local code governing the installation site.
General Electrical Notes
·Each cabinet should be wired to a SEPARATE 15 Amp circuit.
·Unless otherwise specified, ALL WIRING supplied by the contractor must be APPROVED 12 Ga. AWG.
·Disconnect device must be provided in the branch circuit by electrician.
* You have the option of wiring a fluorescent light in this cabinet. Please contact a licensed
electrician for consultation.
Rev-100308
Electrical Instructions
Model: ECO-6
