Dust Cap
Installing Cartridge.
Cartridge Replacement
STEP 2
Remove cartridge from mylar bag.
The new cartridge has a dust cap on
top. Remove the dust cap. Make sure
there is no dust or debris where the
dust cap was located.
Push the cartridge into the
X-PLO₂R so it is fully inside.
Connect charged battery
to the X-PLO₂R.
Insert new cartridge top first into the
X-PLO₂R. Do not leave the cartridge
ends exposed; the cartridge should be
inserted into the X-PLO₂R as soon as
the used cartridge is removed.
The cartridge pull handle
should lay flat once the cartridge
is secured.
Turn on the X-PLO₂R by pressing the
power button for 2 seconds. Set the
flow setting to your prescribed setting
and use normally.
1
1
3
3
2
2
4
4
6
6
5
5
LBL 5026-0
2
By:
American Medical Sales and Rentals
15055 E. Hinsdale Drive, Bldg D
Centennial, CO 80112
Phone: +1 (877) 774-9271
www.oxygenconcentratorstore.com
E-mail: [email protected]
