28
MAKING A CALL
Direct Dial from Handset
Press a LINE key and listen for the dial tone. The
“In-Use” indicator of the selected line on the base unit
will be turned ON. Line number will appear on the
handset display.
Note: If the selected line is engaged by another Handset, “L1 BUSY USE L2?” will
appear on the display and the handset will return to stand-by in a few seconds.
If the selected line is engaged by the base unit, the phone will enter into Conference
Call. (see page 36)
— OR —
Press [Spk.] and listen for the dial tone. The
Speakerphone indicator on the handset and the “Line 1
In-Use” indicator on the base unit will be turned ON.
“L1 ON” will appear on the handset display.
Note:
If both lines are idle, pressing [Spk.] will activate Line 1. If you want to access Line 2,
press [Line 2] first, then press [Spk.]
If Line 1 is engaged by another handset, “L1 BUSY” will appear on the display for a
while and Line 2 will be activated.
If Line 1 is engaged by the base unit, the phone will enter into Conference Call.
W ith a dial tone, dial the phone num ber. The phone
num ber will be shown on the display along with the call
tim er.
Press [Bye] to end your call.
Direct Dial from Base Unit
Press an available LINE key and listen for the dial tone.
The “In-Use” indicator of the selected line on the base
unit will be turned ON. “SPEAKER” and “Line
num ber” will appear on the base unit display.
Dial the phone num ber.
Note:
Pressing a line engaged by a handset will enter into
Conference Call
.
L1 ON
HOLD
SERVICE DIR. DI
AL V.M.
L1 ON
HOLD
SERVICE DIR. DI
AL V.M.
L1 ON
1234567
00:01
HOLD
3W AY
SERVICE
SPEAKER LINE1
HOLD
SERVICE DIR. DI
AL V.M.
BAS IC O PE RATIO N
All manuals and user guides at all-guides.com
