IMPORTANT: To ensure the proper operation of your Answering System,
1.
Press the RESET button at the back of the BASE UNIT before initial use.
2. Wait for at least 45 seconds after plugging the AC ADAPTOR into the
POWER-IN CONNECTION JACK before operating your Answering System.
Setting the Day/Time Stamp
Press and hold down the button until you hear the announcement “
Please enter the
day and time
.” Then, enter the current day and time.
Press the button to confirm the selected day and time. The system will announce
the set day and time.
NOTES:
1.
The
HANDSET
and
BASE UNIT
clock are independent from each other. Set the
BASE UNIT
clock by following the time setting on the
HANDSET
clock.
2.
In case of power failure, reset the time setting on the
BASE UNIT
clock.
Recording Your Outgoing Messages
Your Answering System provides one PRIMARY MAILBOX and four individual
MAILBOXES (1, 2, 3, 4) which can receive their own Incoming Messages (ICM). Before
using your Answering System, it is suggested that you record an Outgoing Message
(OGM). This is the announcement callers will hear when the system answers a call.
A prerecorded system announcement “
Please record your message after the beep
” is
available if you choose not to record your own OGM.
1.
Day Setting
Press and hold down the button.
The corresponding day will be
displayed and announced. Release the
button when the desired day is
mentioned.
2.
Hour Setting
Press and hold down the button.
The corresponding hour will be
displayed and announced. Release
the button when the desired hour is
mentioned.
3.
Minute Setting
Press and hold down the button.
The corresponding minute will be
displayed and announced. Release the
button when the desired minute is
mentioned.
Answering System Operation
28
1
2
3
Summary of Contents for GH9488
Page 54: ...Notes 46...
