Cordless Telephone Operation
Caller ID Sys
11
Using the Headset Feature
Your telephone can utilize a headset (not included) to be connected to your
HANDSET
for you
to enjoy hands-free communication.
Pull out the HEADSET JACK COVER, then insert the small plug on the end of the headset into
the HEADSET JACK to the left side of the
HANDSET
. Follow the procedures discussed in
“Receiving Calls” and “Placing Calls” to receive and place a call.
NOTE:
When you plug the headset plug into the HEADSET JACK it automatically mutes the
MICROPHONE and SPEAKER of the
HANDSET
. Unplug the headset to return the
HANDSET
to normal use.
Headsets are available at most retail outlets that sell telephone equipment. The HEADSET
JACK is compatible with 2.5 mm headset plugs only.
MICROPHONE
HEADSET
SPEAKER
HEADSET JACK
HEADSET JACK
COVER
HEADSET PLUG (2.5mm)
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
manual 5815 analog.qxd 3/16/2004 2:40 PM Page 18
