Workbench Mode
1. Firstly, set up the legs by following the same steps as detailed with scaffold mode
section.
2. Pull up the let switch on the side of each leg to release them, then pull the inner
legs out to the workbench height 80 cm. There are 3 locking positions, each for a
height. The lowest one is 52 cm, the second is 66 cm and the highest is 80 cm.
52/66 cm are for scaffold mode. 80cm is for workbench & sawhorse mode.
3. Gently turn the workbench upright onto a stable, level surface.
NOTE:
DO NOT step on the workbench while the legs are fully extended.
Scaffold Mode
1. Release all legs from their locking position, then rotate each pair of legs until
you cannot move them anymore.
2. Ensure the gusset brace is locked by pushing it down. Repeat for all the other
gusset braces, forming a scaffold.