fOR LARGE SIZE TELEVISIONS:
If your television is very large, you may need to extend
the Vertical Metal Exterior Bars (A2) quite a distance
from the mounting holes in your TV.
2-6. Extend the Vertical Metal Exterior Bars (A2) as far as
you need to in order to accomodate your soundbar and
TV, however
MAkE SURE
you leave
at least two
holes past the TV mounting screw as shown in Fig. 24.
This will allow enough support to safely hold your
soundbar in place.
NOTE: DO NOT attempt to mount the Vertical Metal
Exterior Bars (A2) with LESS THAN TWO holes past
your mounting point, as shown in Figs. 24 & 25.
This amount of space is required to safely support
the weight of the soundbar.
2-7. In cases in which in you need to extend the Vertical
Metal Exterior Bars (A2) to accommodate a large TV,
you will need to add an additional Washer (R or S) to
the TV mounting holes that are not covered by the
Vertical Metal Exterior Bars (A2). See Fig. 26.
This extra Washer will fill the space between the
Vertical Mounting Bars (A2 & A3) and your wall
mount or pole mounting system to ensure a safe
and even installation:
fig. 24
1
1
2
2
3
fig. 25
8
fig. 26
A3
A2
A3
A2
A3
R or S
!
R or S