Assembly InstructIons
note:
2 PeoPle Are reCoMMenDeD to AsseMBle tHIs FurnIture. to AvoID DAMAGe DurInG AsseMBly, It sHoulD Be AsseMBleD
on A soFt surFACe.
1.
AttAch
the top shelf support Bar (DsyF12) to the back of the Front wood Frame (DsyF11) using four 32 mm screws (DsyF2)
as shown above.
Tighten fully, but be careful not to overtighten.
2.
AttAch
the Bottom shelf support Bar (DsyF13) to the back of the Front wood Frame (DsyF11) using four 32 mm screws
(DsyF2).
Tighten fully, but be careful not to overtighten.
3.
slIDe
four Glass Bumper rings (DsyF4) onto the Middle shelf support Bar (DsyF14) as shown in Fig. 1A.
sPAce
them evenly apart.
4.
AttAch
the Middle shelf support Bar (DsyF14) to the back of the Front wood Frame (DsyF11) using two 12 mm screws
(DsyF1).
Tighten fully, but be careful not to overtighten.
5
Fig. 1
Fig. 1A
DsyF2
DsyF12
DsyF13
DsyF1
DsyF1
DsyF14
DsyF14
DsyF2
DsyF11
DsyF4
