Bell'O 8335 Installation Manual Download Page 3

Page: 3 / 23

English

NEVER exceed the maximum load capacity of 280 lbs (127 kg)

Precautions!

• This mounting bracket was designed to be installed and utilized ONLY

as specified in this manual. Bell’O International Corporation will not

be responsible for failure to assemble as directed or for the improper

assembly, use, or handling of this product.

• Improper installation of this product may cause damage or serious

injury. Bell'O International Corporation cannot be liable for direct or

indirect damage or injury caused by incorrect mounting, incorrect

use, or incorrect assembly.

• If the mounting bracket will be attached to any structure other than

those specified in this manual, only a licensed professional

contractor/installer should perform this installation. The supporting

structure must support, at minimum, four times the combined weight

of the mounting bracket and TV. It is the responsibility and liability of

the installer to ensure the suitability of the supporting structure.

• This product should NEVER be mounted to metal framing studs.

• Check carefully to ensure that there are no missing or damaged parts.

Never use defective parts. If any parts are damaged or missing, call

Bell'O International Corporation at 888-779-7781 and parts will be

shipped directly to purchaser. Please contact Bell’O International Corp.

before attempting to return products to the point of purchase.

• Specifications are subject to change without notice.

• The maximum weight of your television cannot exceed the maximum

weight rating of your mount or any attached Bell'O

UL listed adapters

sold separately, whichever is lower.

Summary of Contents for 8335
























Search results

Summary of Contents for 8335

Reviews:

Related manuals for 8335

Brands by name

Popular brands

Bell'O 8335, Installation Manual

Search results

Summary of Contents for 8335

Reviews:

Related manuals for 8335

Brands by name

Popular brands