English
If you need to remove the TV
Flat screen TVs are very heavy and extremely fragile. Exercise caution when removing
the display from the mount to avoid equipment damage or personal injury.
If your cables are accessible, disconnect all power and A/V cables before removing the display from
the Wall Mount (WM). If cables are not accessible, have an assistant remove the cables as soon as
the TV is lifted off the wall mount. Also have the assistant hold the TV as you loosen the Security
Screws (X or W) from underneath using a Phillips-head screwdriver. Lift the TV straight up until it
becomes free from the wall mount.
You really need two people for this part of the task: one person can hold the TV steady while
the other turns the security screws into the Wall Mount (WM). You may need to align the
Monitor Plate (MP) and the wall plate to ensure proper insertion of the security screws. After
the TV is installed,
carefully
try to lift it off to make sure it is secure. If it is correctly secured,
the TV should not move.
After you’re confident it is properly installed and the TV is securely mounted to the wall, you
need to tighten the Security Screws (X or W) using a Phillips-head screwdriver as shown in
Figure 13.
After your TV is installed, you can adjust the tilt position. Slightly loosen the two Tilt Screws
(see Figure 13) on each side of the mount and tilt the monitor into the desired position. Then
tighten the Tilt Screws completely to lock the TV into place.
Under no circumstances should these
screws be loosened completely and/or removed from the bracket.
Adjusting your mount
19
Visit www.BellO.com for more information on home theater furniture.
Visit www.Dummies.com for other great products, books, and free eTips!
Visit www.Paladin-Tools.com for information on the Cable & Satellite Installation Kit For Dummies.
Summary of Contents for 8220
Page 1: ......
