Instructions
Features:
Easy Installation
Easy Operation
Works with MAX 99 transmitters
Has a bright LED Screen
Can show service types—Call and Bill
Has Adjustable Volume
Can save 20 Calls in order and displays uncancelled calls
Sketch
1. Loud Speaker
2. FUN-Function Key
3. SEL-Digit Select
4. NEXT-Adjust Digit
5. ENT– Confirm
6. Volume Adjust
7. Antenna
8. Audio Output
9. Power
System Setting
When the power is on, the 99P will display “00” to “99” to “—” which is standby.
9
Functions
F1 - Save Transmitter
F2 - Delete Transmitter
F3 - Set Rolling Display Time
F8 - Display Time
F9 - Restore Factory Details
F1 - Save Transmitter
1.
Press “FUN” key - It will display “F1”.
2.
Press “ENT” key - It will display “01”.
3.
Press “SEL” Key to select the digit you want to change
4.
Press “NEXT” to select the number.
5.
Once you have the 2 digit number you want to programme, press the Call Button for
2 seconds until the display shows the next available number to programme. This is
useful when you have multiple Call Button to programme.
6.
Test the Call Button by pressing “FUN” twice to go to standby and pressing the Call
Button - your 99P will show the number you have programmed to that Call Button.
If you have a Cancel Button, repeat the steps above, saving it to the same number as
the Call Button
Note: When the 99P shows “E3”, there is no space to save any more transmitters.
When the 99P shows “E1”, it means this number has been saved already.
F2 - Delete Transmitter
1.
Press “FUN” key - It will display “F1”.
2.
Press “NEXT” key - It will display “F2”
3.
Press “ENT” key - It will display “01”.
4.
Press “SEL” Key to select the digit you want to change
5.
Press “NEXT” to select the number you want to delete.
6.
Press “ENT” - The 99P will beep to indicate the number has been deleted and will
show the next available number to delete.
Note: To delete all transmitters repeat steps 1 - 4 and change the number to “00”
Press “FUN” twice to go to standby.
Front
Back
