EN / Bellmarine AC- liquid cooled e-propulsion systems
11
4.5
OTHER OPERATION FUNCTIONS
During normal operation the following functions exist and
operate autonomously:
1.
Boost function
:
To accommodate fast maneuvering in the two drive
modes, the Bellmarine AC e-propulsion system is able
to deliver an additional amount of power for a limited
amount of time when changing direction by the
throttle.
2.
Sleep function
:
Whenever the motor is not spinning for over 60
minutes (standard setting), the Bellmarine AC e-
propulsion system will switch to sleep mode limiting
the amount of power use.
To switch back to normal operation switch the system
Off
and
On
by using the motor switch.
4.6
DEPARTURE
Before departure, always check the system in Drive mode
for correct functioning.
Follow these steps:
1. Disconnect the shore connection.
2. Check if the ball head crane of your cooling system is
open.
3. Turn the main switch on.
4. Put the joystick in the neutral position.
5. Turn the motor switch on.
6. Check if your boat is moored well.
7. Check the battery condition.
8. Choose the power program (maximum or economy).
9. Check system carefully in forward and backward
direction.
4.7
ARRIVAL
Follow these steps after arrival:
1. Put the joystick in the neutral position.
2. Check the battery condition.
3. Turn the motor switch off.
4. Turn the main switch off.
5. Close the Water intake valve of the fresh water
cooling.
6. Connect the shore connection and make sure it works
properly.
