ON
OFF
Changing the radio key
If you start hearing monitor alarms for no obvious reason, there is prob-
ably a nearby Visit system that triggers your system. In order to avoid
radio interference you need to change the radio key on all units.
Please note:
All units are set to the same radio key from factory and all
switches are positioned down=off per default.
1
Open the Visit monitor front cover and move any radio key switch(es) to
the up=on position to change the radio key. Repeat the procedure for
all monitors. Note that all units must be set to the
same
radio key.
2
Press and hold the button on the Smart hub until the bottom LED
starts to blink in green/amber.
3
Press the test buttons on any of the Visit monitors. The Smart hub LED
light will stay lit for 5 seconds to show that the new radio key is being
transferred. When the transmission is completed the LED will turn off.
1
2
3
Smart hub
Monitor
Monitor
35
36
Summary of Contents for Visit Smart hub BE1310
Page 1: ...BE1310 Visit Smart hub EN...
