7
UP
Press UP Key once , LED display flashes the current set temperature, repeated
pressing increases temperature incrementally by 1 Degree, increase until you reach
desired temperature, Press Zone Key to set.
Note:
Display will flash for 5 Seconds only, if no action is taken during this time or the
zone key pressed to lock in new selected temperature, the flashing stops and engages
the last set temperature.
Down
Press DOWN Key once , LED display flashes the current set temperature,
repeated pressing decreases temperature incrementally by 1 Degree,
decrease until you reach desired temperature, Press Zone Key to set.
Note: Display will flash for 5 Seconds only, if no action is taken during this
time or the zone key pressed to lock in new selected temperature, the
flashing stops and engages the last set temperature.
Child Lock
（
Combination key
）
1
、
Lock
：
Press both keys at the same time for 3 seconds to lock.
2
、
Unlock
：
Press both keys at the same time for 3 seconds to
unlock.
Fahrenheit/Celsius display interchange
Switch temperature display between Fahrenheit and Celsius by pressing the
key.
Attention
1.
For both the upper or lower zones/compartments the temperature can be set to range
from 5-22 Degrees,however the lower zone can only be set equal to the upper zone
or to a higher temperature(E.g. always set upper zone temperature first for the cooler
wines , then lower zone temperature can be increased for higher temperature wines).
2. Alarm sound: when the system
seperate a
nd alarm sound, press any
key on the control panel to cancel the alarm sound.
3. Temperature sensor failure:
When the temperature sensor failures occur, error code displays.
E1 for open circuit and E2 for short circuit of upper zone.
E5 for open circuit and E6 for short circuit of lower zone.
