7
Maintenance And
Cleaning
1. Always turn the power off, remove the
plug and allow the toaster to cool before
cleaning.
2. To remove any crumbs from the toaster, slide
out the crumb tray from the toaster, empty
and place it back in the toaster before using
it again.
3. Wipe the outside of the toaster with a slightly
dampened cloth and polish it with a soft dry
cloth.
4. Do not immerse it in water or any liquid when
you clean the unit.
5. To clean the interior, turn the toaster upside
down (after you have cleaned the crumb
tray) over the sink and shake out any pieces
of bread that may be stuck between the
grills.
6. Care must be taken not to touch any hot
surfaces. Do not store or cover the appliance
until it has fully cooled down.
7. Do not use harsh abrasives, caustic cleaners
or oven cleaners when cleaning this
appliance.
8. If you need to remove a piece of bread
which is jammed in the slot, unplug the
appliance, allow to cool, press down the
toaster control level, gently dislodge the
blockage with a non-metallic object, and lift
the toaster control lever to remove the
blockage.
9. The crumb tray should be cleaned regularly.
Do not allow breadcrumbs to accumulate in
the bottom of the toaster.
10. Never insert any hard object into the bread
slot as this could damage the heating
elements.
11. To clean the exterior and the cord, wipe it
down with a damp cloth. Let it dry before
using it again.
12. Do not use scouring powders, abrasive pads,
wire or steel wool, oven cleaners or bleach.
13. Never wrap the cord around the outside
of the appliance during or after use. Cord
storage is located under the appliance.
Specifications
Power Supply……………………AC 220-240V~50Hz
Power Consumption………………….………1000W
NOTE: As a result of continual
improvements, the design and
specifications of the product
within may differ slightly to the unit
illustrated from the packaging.
Summary of Contents for BTT815
Page 1: ...2 Slice Toaster BTT815 ...
