Bellini BTT400C, Manual

Page: 5 / 8

5
Getting to Know Your 2
Slice Toaster
Congratulations on the purchase of your new
Bellini 2 Slice Toaster.
Before using your new 2 Slice Toaster for the first
time, it is extremely important that you read and
follow the instructions in this Use and Care booklet,
even if you feel that you are familiar with this type
of appliance.
In particular, please pay close attention to the
section entitled IMPORTANT SAFEGUARDS. Find a
safe and convenient place to keep this booklet
for future reference.
This appliance has been designed to operate
from a standard domestic power outlet. It is not
intended for industrial or commercial use.
Before Using For The First
Time
Ensure the above safety precautions are
understood.
1. Carefully unpack the appliance and remove
all the packaging materials attached to your
toaster.
2. Read the manual and carefully follow the
instructions.
3. Always use the appliance with a power outlet
of the same voltage (A.C. only) as marked on
the bottom of unit.
4. Check that the removable crumb tray is
correctly locked underneath the toaster.
5. Unwind the supply cord completely. Connect
to the mains wall outlet.
First Time Use
1. Before using for the first time, set the
Browning
Control
to “2” position without inserting any
bread.
2. Press the
High lift / bread release lever
down until it clicks into place to turn on the
toaster. Using it for the first time without bread
will remove any unpleasant odours from the
new appliance.
How to Use Your 2 Slice
Toaster
Plug the Toaster into a standard domestic power
outlet and switch the power outlet on.
Adjust the variable browning control to the
desired toast colour setting. Choose a setting
based on the type of bread you are toasting and
your personal preference. Start on a medium
setting (3-4) and adjust the variable browning
control to a lighter setting (1-2) or darker setting
(5-6).
Note: The condition of the bread will
determine how quickly it toasts. Dry or
stale bread toasts faster than fresh bread.
Place only 1 slice of bread into each of the
toasting slots. Ensure the bread slices are not too
large or thick to fit in the slots.
Press the
High lift / bread release lever
down until it clicks into place. Toasting cycle will
automatically commence.
Note: The lever will not lock into position
if the Toaster is not plugged into a power
outlet or if the power outlet is not switched
on.
When toasting is completed, the toast will pop
up and the Toaster will switch off automatically.
Toasting may be interrupted during the cycle by
pushing the cancel button. Toasting will stop and
the toast will pop-up.
Allow the Toaster 15 to 20 seconds to cool before
beginning the next toasting cycle. This permits the
electronically controlled thermostat to reset for
the next toasting cycle.
Note: Do not touch the Toaster walls
when the Toaster is in use.
Note: The lift lever is held down to test
the anti-jam operation, the unit requires
about 60 – 80 seconds cool-down period
before used again.
The high lift facility makes it easier to remove
the toast. When toasting is complete, press
the lowering lever upward and remove the
toast from the toaster.