5
Operation
Warning: Do not operate the kettle without
enough water filled.
It is recommended to operate the kettle several
times following the below instructions and
discard the boiled water before first use. This will
remove any material, residue or dust from the
appliance, which may exist from the
manufacturing process.
1. Open the lid by pressing down the Lid
opening button and fill with fresh cold water
into the kettle up to the desired water level
without exceeding the maximum level. Then
close the lid ensuring that it is firmly closed.
The Maximum water level is indicated inside the
kettle and is marked by the word “1.7L -MAX”.
The maximum amount of water to be used is
indicated by the “MAX FILL” level in the right
figure. Do not overfill the kettle as water may
eject from the kettle.
The minimum amount of water is 0.5L. Please
ensure the water level reaches at least the
bended part of tube inside the kettle. The
minimum water level is indicated by the “MIN
FILL” level in the figure below.
1.7L
Max.
Max. Fill
Min. Fill
Caution: The filled water level must be
between “1.7L” and “0.5L”. Failure to keep
the water level within this range may
damage the element, kettle components
or water may eject from the appliance
when boiling.
2. Place the kettle on the Power Base and
connect it to the power supply. Position the
kettle so that the spout of kettle is facing
away from you and any other materials that
could be damaged by hot steam.
3. Press the On/Off switch down and the lamp
will be illuminated. Do not open the lid while
the water is boiling.
4. The Power will cut off automatically and the
switch will return to the OFF position when
the water has boiled. The indicator lamp
will switch off. Unplug the kettle after use
immediately.
5. The boiling process can be terminated at
any time by lifting the kettle off the Base or by
lifting the On/Off switch up.
6. Lift the kettle from the power base and then
pour the water.
Note: Operate carefully when pouring
the water from your kettle as boiling
water may result in scald, besides, don’t
open the lid while the water in the
kettle is hot.
CAUTION
• Take care and keep the kettle level when
removing it with boiled water, otherwise, hot
water may be leaked and burn your body.
• Never operate the appliance empty. If
this occurs, the thermal cut-off inside the
kettle would operate to cut off power
automatically. Unplug the appliance and let
it completely cool down.
• Beware of steam coming from the spout or lid
especially during refilling. Never open the lid
when the kettle is boiling.
• The kettle switches off automatically when
the water has boiled. Always keep the lid
closed when pouring the water out.
• If the kettle has recently boiled and switched
off automatically, it may be necessary to wait
for approx. 15 seconds before the switch can
be reset.
• Beware of steam and scalding!