GSM Sales Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 www.belliniappliances.com.au
Model: BRE133BI Fineline: 5104015 Built-In Drawer Refrigerator
This appliance is designed to operate on a power supply of 220/240 volts.
Connected to a separate power point with a correctly earthed three pin socket.
Do not use double adaptors.
Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
Ensure all vents are clear of obstruction particularly if the appliance is a built-in
model.
Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
BEFORE USING FOR THE FIRST TIME
Do not position the appliance with its rear panel directly against a wall.
For good circulation and operating efficiency, the ventilation grilles must never be
blocked.
Remove all packaging and place the appliance on a stable, secure flat surface. Position
the appliance away from heat sources, where the appliance is well-ventilated and
protected from moisture or extremes of heat or cold.
The appliance may not function properly if the temperature rises above +30
O
C
(standard model). This appliance meets the operating conditions according to the
standard EN 411-4 in climate class 4. A 10 amp fuse is fitted. Never replace with a fuse
rated higher than 10A.
NEVER USE AN EXTENSION LEAD
Do not use extension cords or double adapter plugs with this appliance.
If the power cord does not reach the nearest power point, either rearrange the layout
or consult an electrician to fit a new power point.
If the appliance is unplugged or the power is cut off, wait for at least 5 minutes before
plugging in and restarting the appliance to avoid damaging the compressor.
Page 4
Summary of Contents for BRE133BI
Page 2: ......
