background image

Safety Instructions

Never to do: 

This range hood cannot be installed for outdoor use.

It is prohibited to fit the range hood over a solid fuel
stove

This appliance must not be connected to a chimney
or vent flue which is in use.

This appliance is not to be vented into the roof
cavity, must exit into open air.

Exhaust air must not be discharged into a wall
cavity, unless the cavity is designed for the purpose.

This appliance should not be connected to ducting
which ventilates rooms with fire places.

Always to do: 

Attention should be given to ensure that any
applicable regulations concerning discharge
of exhaust air are fulfilled.

This appliance should be installed and
maintained by a suitably qualified and
competent person in accordance with the
relevant safety regulations.

Before connecting the appliance to the mains
supply, ensure that the voltage and frequency
details on the rating plate are consistent with
the source of supply.

This product must not be disposed together 
with domestic waste. This product has to be 
disposed at an authorised place for recycling 
of electrical and electronic appliances. 

By collecting and recycling waste, you help save natural 
resources, and make sure the product is disposed in an 
environmental friendly and healthy way.

 

Summary of Contents for BRA903SLX2
















Reviews: