background image

11 

Maintenance and cleaning

 

Caution: 

• Before maintenance or cleaning is carried out, the
range hood should be disconnected from the main 
power supply. Ensure that the range hood is switched 
off at the wall socket and the plug removed. 
• External surfaces are susceptible to scratches and
abrasions, so please follow the cleaning instructions
to ensure the best possible result is achieved without
damage.

GENERAL 

Cleaning and maintenance should be carried out with 
the appliance cold especially when cleaning 
Avoid leaving alkaline or acid substances (lemon 
juice, vinegar etc.) on the surfaces 

STAINLESS STEEL 

The stainless steel must be clea ned regularly (e.g. 
weekly) to ensure long life expectancy. 
Dry with a clean soft clot h. A speci alized stainless 
steel cleaning fluid may be used. 
NOTE:  Ensure  that  wipin  g  is  done  al  ong  with  the 

grain  of  the  stainless  steel  to  preve  nt  any 
unsightly crisscross scratching pattern s from 
appearing. 

CONTROL PANEL SURFACE 

The inlay control panel can be cleaned using warm 
soapy water. Ensure the cloth is clean and well wrung 
before cleaning. Use a dry soft cloth to remove any 
excess moisture left after cleaning. 

Important 

Avoid using harsh cleaning chemicals, strong 
household detergents or products containing 
abrasives as this will affect the appliance 
appearance and potentially remove any printing 
of artwork on the control panel and will void 
manufactures warrantee 

GREASE MESH FILTERS 

The mesh filters can be cleaned either by hand or in 
the dishwasher. After cleaning ensure that the filters 
are completely dry before refitting. 
- By hand: Soak in warm water and a neutral
washing up liquid. For stubborn grease stains use a
soft nylon brush or sponge to help remove these
stains. (Leave to dry naturally out of direct sun light)
- In a dishwasher: Ensure that placement of the
filters is made so as to not impede the function of the
spray arm. Washing the filters in a dishwasher may
cause discoloration of the aluminum inner mesh over
time although it will not affect their performance.
Filters should be washed separately to crockery and
kitchen utensils. it is advisable not to use rinse aid.

CHARCOAL FILTERS 

When air recirculation mode is chosen, a charcoal 
filter is a must. It is not washable and should be 
replaced when it no longer absorbs kitchen odors 
effectively. Under normal use, this would be 
approximately every 3 months or more frequently for 
particularly heavy usage. 

REPLACE LAMP 

Remove two grease mesh filters, twist to remove bulb, 
whilst cool, and replace carefully with a new bulb. The 
range hood takes 2 x 40W incandescent bulbs. 

Important 

When handling bulb, make sure it is completely co ol 
down before any direct contact to hands. 

Summary of Contents for BRA903SLX
















Reviews: