8
5. Fit the
flexible exhaust duct
onto
outlet
. (
Air Extraction mode only
)
Note : For the
Air Circulation Mode
option , skip step 5 and proceed with step 6.
6. Place
Upper Decorative Chimney
inside the
Lower Decorative Chimney.
Connect the
Lower Chimney retaining bracket
to the
Lower Decorative Chimney
with 2 x
ST4x8mm
screws,
do not fully tighten, allowing for sufficient clearance to telescopically adjust the
Upper Decorative
Chimney
to
the desired position when installation is completed.
Lower decorative chimney (Outer)
7. Install active Charcoal Filters (
Air Recirculation Mode
only )
Note: For
Air Extraction Mode
option, skip Step 7 and proceed with Step 8.
Upper decorative chimney (Inner)
Lower Chimney retaining bracket
1) Remove the lower and upper chimney sections from the main body of the hood.
2) Use a screwdriver to undo the screws that hold the motor access panel in place.
