background image

11

 

Replacement of the Oven Light Bulb 

Door Removal 

In order to obtain easier access to the oven chamber 
for cleaning, it is possible to remove the door. To do 
this, tilt the safety catch part of the hinge upwards. 
Close the door lightly, lift and pull it out towards you. 
In order to fit the door back on to the a, do the reverse. 
When fitting, ensure that the notch of the hinge is 
correctly placed on the protrusion of the hinge holder. 
After the door is fitted to the oven, the safety catch 
should be carefully lowered down again.    If the 
safety catch is not set it may cause damage to the 
hinge when closing the door. 

Middle Layer Glass Removal 

The oven door is made up of 3 panes of glass and has vents at the top and bottom. When the oven is operating, 
air is circulated through the door to keep the outer pane cool. If condensation has worked its way in between the 
glass panes, the door can be dismantled in order to clean in between the panes. 
Remove the door as per above instruction and place it on a protective surface (e.g. on a table cloth) to prevent it 
getting scratched. The door handle should line up with the edge of the table. Make sure the glass lies flat to avoid 
breakage of glass during cleaning.
1. Undo the 2 screws on upper bracket.
2. Take out upper bracket and first pane of glass.
3. Loosen the 4 clips.
4. Slide out middle pane of glass carefully.

 

Clean the glass panes and other parts with a damp microfiber cloth

or a clean sponge and a solution of hot water with a little washing-up liquid. Wipe dry using a soft cloth.

WARNING! 

Ensure that the appliance is switched off before replacing the lamp to avoid the 

possibility of electric shock.

‹

 

Cut off the supply of power to the oven by turning 

off the omni-polar switch connecting it to the mains, or 

by removing the plug if it is accessible; Avoids 

appearing the electric shock;

‹

 

Unscrew the glass cover attached to the lamp 

holder;

 

‹

 Pull out the lamp and replace it with another high-

temperature lamp (300

) with the following 

characteristics:  


Voltage: AC230V
Wattage: 25W
Socket: G9

‹

 

Remount the glass cover and reconnect the 

appliance to the power supply.

 

Summary of Contents for BOT608B


















Reviews: