1. Anti-title bracket 2.Ground screw
Product Model
A(mm)
B(mm)
850
50
50
GSM Sales Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aust OR 0508123108 NZ
www.belliniappliances.com.au Model: BFG509W-F Fineline: 5104012
5
0cm Freestanding Gas Oven
supports and burners.
• Remove the accessories from the oven.Proceed as follows:
• Tilt the appliance by raising one side slightly from the floor.
• With the plates in position, screw the adjustable feet into the
mounting holes on the underneath of the appliance.
• Repeat the process on the other side.You can make the final
adjustments to the feet in order to level the appliance once the gas
and electricity supply have been connected. If it is necessary to pull
the appliance, screw the adjustable feet in fully. Make the final settings
only when the other installation tasks have been completed.
In order to prevent tipping of the appliance, this stabilizing means
must be installed. Using ground screw 2 to mount the anti-title bracket
1 on the ground showed as the below picture .
Fitting the adjustable feet Before hand:
• Remove all parts that are not permanently fixed, especially the pan
7
50
Height(mm)
With Hemline
900
Height(mm)