Bellini BDOM609TCX Installation And User Manual Download Page 3

 

  To reduce the risk of fire, do not place or install 

this unit in areas where the ventilation or 
circulation ducts may become blocked. Make sure 
there are at least 10mm of space between the 
back of your oven and the wall. Keep some 
distance on each side of your oven that you can 
use that distance flowing installing instructions. 

  The unit's power cord must be connected to a 

properly grounded and protected, 220-240V 
electrical outlet. Always use ground fault 
protection where required by the electrical code. 

  When transporting or storing the unit, keep it in a 

dry location, free from dust, excessive vibration or 
other factors, which may damage the unit. 

  Do not operate oven with a damaged cord, plug or 

if the oven has malfunctioned or has been 
dropped or damaged in any manner.  Return 
oven to authorised service facility for repair. 

  Only authorised personnel should carry out 

servicing. (Certificate of Compliance to be 
retained) 

  Always ensure the appliance is switched off 

before cleaning or replacing parts. 

  Do not use steam cleaners, as this may cause 

moisture build-up. 

  Always clean the appliance immediately after any 

food spills. 

 

THIS APPLIANCE MUST BE EARTHED. 

  To maintain safe operation, it is recommended 

that the product be inspected every five years by 
an authorised service person. 

 
Oven 

  During use the appliance becomes hot. Care 

should be taken to avoid touching the hot surfaces 
inside the oven. 

  Switch the appliance off before removing the oven 

light glass for globe replacement. 

  To avoid an accident, ensure that oven shelves 

and fittings are always inserted into the appliance 
in accordance with the instructions. 

  Do not use the door as a shelf. 

  Do not push down when the oven door is open. 

 

Grill 

  Do not cover the grill insert with foil, as fat built up 

may catch on fire. 

  Always keep the grill dish clean as any build up 

may catch on fire. 

  Do not leave the grill on unattended. 

  To avoid fire, ensure that grill trays and fittings are 

always inserted into the appliance in accordance 
with the instructions. 

  Do not place thick portions of food under the grill. 

Foods may curl, catch and ignite. 

  Accessible parts may become hot when grill is in 

use. Children should be kept away. 

 

Environmental Hints 

  Use the oven efficiently, by cooking many trays of 

food at the same time. 

  Cook 2 trays of scones, small cakes or sausage 

rolls at the same time. 

  Select the correct shelf location for food being 

cooked. 

  Do not open the oven door more than necessary. 

  After the oven is turned off it retains heat for some 

time.  

 

This product must not be disposed together 
with domestic waste. This product has to be 
disposed at an authorised place for recycling 
of electrical and electronic appliances. 

By collecting and recycling waste, you help save natural 
resources, and make sure the product is disposed in an 
environmental friendly and healthy way.

 

 
 
 
 
 
 

3

Summary of Contents for BDOM609TCX


















Reviews: