Bellini ALEXANDER 4200, Instructions Manual

Page: 8 / 14

ASSEMBLY INSTRUCTIONS
Page 8/14
Diagram 1:
Unpack and familiarize yourself with all parts and
components by comparing them with the pictures
and descriptions on pages 4,5,6,7.
Mounting the drawer guides to the bottom of the
left crib end and right crib end. Using Allen wrench
B, mount the two drawer guides to the bottom of the
left crib end and right crib end
with screws(A) , self
locking washer (J), and small metal washer (K)
like
DIAGRAM 1/B in the lowest holes on the inside of the
end panels.Tighten screws.
STEP 1-
Drawer Glides Assembly
Diagram 2:
Attach stabilizer bars (Page 6) to the right crib
end. From the outside of the right crib end insert
screws (L) ,self locking washer (J), and big metal
washers(D) like
DIAGRAM 2/A
through holes
provided and into stabilizer bar. Insert barrel nut
(C) into stabilizer bar and thread
screws (L) ,self
locking washer (J), and big metal washers(D)
into
nuts (C). Tighten until snug with allen wrench (B).
Repeat for the left crib end.
Lie dust cover(thin masonite board) on top of dust
cover supports, on inside of the stabilizer bars.
STEP 2-
Stabilizer Bars Assembly
DIAGRAM 1/B
DIAGRAM 2/A
K J A
L J D