12
BULB REPLACEMENT
Important :
The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
Always switch off the electricity supply before
carrying out any operations on the appliance. When
handling bulb, make sure it has completely cooled
down before any direct contact with hands.
When handling bulbs hold with a cloth or gloves to
ensure perspiration does not come in contact with
the bulb as this can reduce the life of the bulb.
Note:
Before changing the lights, make sure that the appliance is turned off and
unplugged .
Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
Remove the grease filter.
Put one hand into the cavity to gently push out the LED light, and use the other
hand to grab the light and pull it out, and then pull out the light cable.
After changing the lamp, plug in the lamp cable, and press the lamp into the lamp
hole.
•
ILCOS D code for this lamp is: DBR-2/65-H-64
– LED modules –round lamp
– Max wattage: 2
×
2 W
– Voltage range: AC 110-240V
–
Dimensions: