INSTALLATION
Clearances and dimension – require-
ments
No shelf or overhang of combustible ma-
terial should be closer than 650mm above
the hob.
There must be a minimum clearance of
50mm between the edges of the hob and
any side walls; this clearance must be
maintained up to 420mm above the
work top.
There must be a minimum clearance of
50mm between the rear edge of the hob
and the rear wall. This clearance must be
maintained up to 650mm above the work
top.
When installing an extractor hood above
the hob, refer to their Manufacturer’s
instructions.
Minimum height to extractor
as recommend in extractor
instruction manual
*
560mm
50mm min
50mm Min
50mm min
420mm min
490mm
Minimum distance
between carcasses must
be equal to width of hob
*
650mm min
30mm min /
50mm max
