Pull out the power plug to avoid electrical shock
before washing.
After using the washing machine, remove all
the clothes and close the door tightly.
Remove foreign matters
Drain Pump Filter:
Drain pump filter can filter the yarns and small
foreign matters from the washings.
Clean the filter periodically to ensure the normal
operation of washing machine.
According to the soil level within the cycles and
the frequency of the cycles, you have to inspect
and clean the filter regularly.
The pump should be inspected if the machine
does not empty and/or spin;The machine makes
an unusual noise during draining due to objects
such as safety pins, coins etc. blocking the pump.
When the appliance is in use and depending
on the programme selected there can be hot
water
in the pump. Never remove the filter
during a wash cycle, always wait until the
appliance has finished the cycle, and is empty.
When replacing the filter, ensure it Is securely
retight end so.
Warning!
2.Turn the filter
down as shown with
the figure and take
out sundries matters
.
(Fig19)
1.After the power is
disconnected, use
hand to open the
filter cover(Fig18).
3.Reinstall each part
back after sundries
matters are removed
.
(Fig20)
20
Care
and
maintenance
Looking
after
your
appliance
Clean the pump filter :
Fig 18
Fig 19
Fig 20
Notes: Generally, the tap filter is washed first
and then the filter in washing machine will be
washed.
(Fig16,17)
If only the filter in washing machine is washed,
then the steps 1~3 in cleaning the tap filter
shall be repeated
.
Fig 16
Fig 17
