Belling CH302TX, User Manual

Page: 8 / 24

8
Start cooking
After switching the hob on, the buzzer will beep once. All the indicator lights, light up for a second and
go out, to indicate that the ceramic hob is now in standby mode.
1. Touch the On/Off control key. All the indicators show “-”
2. Place a suitable pan on the cooking zone that you wish to use
• Make sure the bottom of the pan and the bottom of the cooking
zone are clean and dry.
3. Touch the relevant heating zone selection control for the zone
you wish to use. The indicator next to the relevant heating zone
will flash ‘0’.
4. Select a heat setting by touching the “-” or “+” control.
• If you don’t choose a heat setting within 1 minute, the hob will
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
• Touch the relevant heating zone selector control, and then use
the plus and/or minus key to adjust the heat setting.
• First touch “-” after touching the heating zone selection control,
the power level changes “9”.
• First touch “+” after touching the heating zone selection control,
the power level changes “1”;