17
To set the time of day
#
Press the Plus and Minus buttons
together for a few seconds, and
release.
#
The ‘
"
’ in between the numbers on
the LED Display will begin to flash.
#
While the ‘
"
’ is flashing it is possi-
ble to adjust the time using the Plus
and Minus buttons. Once the time has
been set, allow approximately 30 sec-
onds before using any of the other
timer functions. This ensures that the
time will remain correct.
To select an alarm tone
There are three tones to chose from.
#
Press the
minus
button to listen to the
first tone.
#
Release the
minus
button and press it
again to listen to the second tone etc.
#
Releasing the
minus
button after the
tone has sounded will automatically
select that tone
Setting the minute minder
#
To set the Minute Minder, press the
Function button once. The bell symbol
will appear and start flashing. The
flashing only lasts for 5 seconds so the
time must be set within this time frame.
#
Use the Plus and Minus button to set
the length of time required. Once this
has been done, the Minute Minder is
set.
#
When the desired length of time has
counted down the alarm will sound.
#
To cancel the tone, press any of the
buttons.
#
To cancel the Minute Minder at any
time, press the function button, then
press the Plus and Minus buttons
together.
Programmer / Clock
