background image

7

This symbol on the product or on its packaging indicates that this 
product should not be treated as household waste. Instead it should 
be handed over to the applicable collection point for the recycling of 
electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative 
consequences for the environment and human health, which could otherwise be caused by 
inappropriate waste handling of this product.

For more detailed information about recycling of this product, please contact your local 
city office, your household waste disposal service or the retailer who you purchased this 
product from. 

Installation, Cleaning and Servicing

•  An authorized person must install this appliance. (Certificate of Compliance to be 

retained).

•  Before using the appliance, ensure that all packing materials are removed from the 

appliance.

•  In order to avoid any potential hazard, the Installation Instructions must be followed.

•  In order to avoid accidental tipping of the appliance (for example, by a child climbing onto 

the open oven door), the anti tilt plate must be installed.

•  Where the appliance is installed next to cabinets, the cabinet material must be capable 

of withstanding 85˚C.

•  Only authorized personnel should carry out servicing (Certificate of Compliance to be 

retained).

•  Always ensure the appliance is switched off before cleaning.

•  Do not use caustic soda- based cleaners.

•  Do not use steam cleaners, as this may cause moisture build up.

•  Always clean the appliance immediately after any food spillage.

•  To be serviced only by an authorized person.

•  Appliances requiring connection to 220-240V and must be earthed.

•  Gas models are NOT APPROVED for installation in marine craft, caravans or mobile 

homes.

Disposal of your old machine

WARNINGS & PRECAUTIONS

Summary of Contents for BFS54DODF





































Reviews: