Belling BE815, Installation And User Instructions Manual, Page: 4 / 28

Congratulations on your choice of a quality Appliance which has been
designed to give you service for many years.
WARNING !
IMPORTANT !
DO NOT connect your appliance to the electricity supply until all packing and
transit protectors have been removed.
• Leave to stand for at least 4 hours before switching on to allow compressor
oil to settle if transported horizontally.
• If you are discarding an old refrigerator with a lock or latch fitted to the door,
disable the lock/latch, ensure that it is left in a safe condition to prevent the
entrapment of young children.
• This fridge/freezer must only be used for its intended purpose i.e the storing
and freezing of edible foodstuff.
• Do not dispose of the appliance on a fire. At the care and protection
of our environment is an ongoing commitment. This appliance which is among
the latest range introduced is particularly environment friendly. Your appliance
contains non CFC / HFC natural substances in the cooling system (Called
R600a) and in the insulation (Called cyclopentane) which are potentially
flammable if exposed to fire. Therefore, take care not to damage, the cooling
circuit / pipes of the appliance in transportation and in use. In case of a
damage do not expose the appliance to fire, potential ignition source and
immediately ventilate the room where the appliance is situated.
• We suggest you contact your local authority for disposal information and
facilities available.
• We do not recommend use of this appliance in an unheated, cold room.
(E.g.: garage, conservatory, annex, shed, out-house etc.)
• To obtain the best possible performance and trouble free operation from your
appliance it is very important to carefully read these instructions.
• Ensure that the plug remains readily accessible. Do not use multiple adapter
bar.
• Failure to observe these instructions may invalidate your right to free service
during the guarantee period.
• Route electrical supply cord to allow easy connection and disconnection
after installation.
• We recommend a separate switch be employed to ensure easy switch on /
off.
WARNING- Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
WARNING- Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
WARNING- Do not damage the refrigerant circuit.
WARNING- Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended by
the manufacturer.
• We suggest you keep these instructions in a safeplace for easy reference.
2